Integrity Fusion’s Standard Female NPT Transition Fitting is engineered for high-pressure, high-performance HDPE-to-steel connections. Designed for IPS SDR 7 pipe and rated for 355 PSI MAOP at 73.4°F, this fitting delivers strength, reliability, and corrosion resistance in demanding environments.
Crafted from ASTM A53/API-5 carbon steel or 304/316 stainless steel and epoxy-coated to meet AWWA C116-01 and C213-01 standards, the fitting incorporates a robust, internally machined and beveled groove. This groove forms a strong mechanical joint, maintaining full HDPE ID coverage for piggable sealing and total corrosion protection.
Compatible with PE3408 / PE4710 / PE100 resins, it meets or exceeds ASTM D2513 Category 3 joint requirements (non-gas applications), and is certified under ASTM D3261, D1598, D1599, ANSI/AWWA C901/C906, NSF/ANSI/CAN-61, and NSF/ANSI-372.
Key Features:
- Internally machined groove design creates a strong, leak-resistant mechanical joint
- Female (FIPT) NPT steel end connects to ANSI/ASME B1.20.1 threads
- 355 PSI MAOP rating at 73.4°F for IPS SDR 7 pipe
- Epoxy-coated carbon steel or 304/316 stainless steel body resists corrosion
- Full HDPE coverage allows piggable seal and thermal stress resistance
- Certified for fusion with PE3408 / PE4710 / PE100 HDPE pipes
- Not rated for natural gas; meets ASTM D2513 Category 3 standards
- Installation Note:
Always apply pipe joint sealant or Teflon tape. Hand tighten, then finish tightening with two strap wrenches—never use pipe wrenches to avoid damaging the transition collar. Pressure test before backfilling, and compact soil carefully around the fitting.
Common Applications:
- Potable water distribution
- Wastewater and landfill systems
- Oil, gas, and saltwater disposal
- Dredging, mining, and industrial processing
- Geothermal, irrigation, and telecom conduit systems
TECHNICAL SPECIFICATIONS AND DOCUMENTATION:
- MATERIAL & TESTING SPECS
- PRODUCT DIMENSION SHEET
- INSTALLATION INSTRUCTIONS
Female (FIPT) NPT Transitions
SDR 7 (standard dimension ratio) 355 PSI (MAOP @ 73.4o F)
| Nominal Size | Transition Collar Epoxy or Stainless |
A Thread Diameter [m] | B Thread Length [m] | C HDPE Pipe OD [m] | D Steel Collar Length [m] | E Exposed HDPE Length [m] | Weight [lbs.] | Item Code |
|---|---|---|---|---|---|---|---|---|
| 1″ IPS | Epoxy | 1.485 | 0.91 | 1.315 | 2.60 | 5.40 | N/A | 400642 |
| 304 Stainless | 1.485 | 0.91 | 1.315 | 2.60 | 5.40 | N/A | 400640 | |
| 316 Stainless | 1.485 | 0.91 | 1.315 | 2.60 | 5.40 | N/A | 400641 | |
| 1 ¼″ IPS | Epoxy | 1.900 | 0.89 | 1.660 | 3.40 | 4.60 | N/A | 400645 |
| 304 Stainless | 1.900 | 0.89 | 1.660 | 3.40 | 4.60 | N/A | 400643 | |
| 316 Stainless | 1.900 | 0.89 | 1.660 | 3.40 | 4.60 | N/A | 400644 | |
| 2″ IPS | Epoxy | 2.750 | 1.00 | 2.375 | 3.40 | 4.60 | N/A | 400524 |
| 304 Stainless | 2.750 | 1.00 | 2.375 | 3.40 | 4.60 | N/A | 400518 | |
| 316 Stainless | 2.750 | 1.00 | 2.375 | 3.40 | 4.60 | N/A | 400521 | |
| 3″ IPS | Epoxy | 4.144 | 1.62 | 3.500 | 4.38 | 3.62 | N/A | 400533 |
| 304 Stainless | 4.144 | 1.62 | 3.500 | 4.38 | 3.62 | N/A | 400527 | |
| 316 Stainless | 4.144 | 1.62 | 3.500 | 4.38 | 3.62 | N/A | 400530 | |
| 4″ IPS | Epoxy | 5.160 | 1.88 | 4.500 | 4.62 | 7.38 | N/A | 400542 |
| 304 Stainless | 5.160 | 1.88 | 4.500 | 4.62 | 7.38 | N/A | 400536 | |
| 316 Stainless | 5.160 | 1.88 | 4.500 | 4.62 | 7.38 | N/A | 400539 |
Related products
